[정보] JBL Bar 9.1 리모컨 커맨드
4
3779
2020-09-22 09:42:21
JBL에서 아주 리모컨을 주옥같이 만들어 줘서...
게임패드마냥 리모컨 키 조합으로 기능들을 사용하여야 하는데..
나이가 먹어서인지;; 다음에 쓸때는 또 까먹어서;;
저번 할인으로 JBL Bar 9.1 사용자분들이 많아져서.. 올려봅니다.
내용 출처는 AVforums.com 내 사운드바 포럼 JBL Bar 9.1 쓰레드입니다.
Calibration
- Place speakers beside seating position
- Press and hold HDMI button for 5 seconds on remote
- Wait until 'calibration-1 done' is displayed on soundbar (count down 5-1)
- Place speakers in desired location
- Press and hold HDMI button for 5 seconds on remote
- Wait until 'calibration-2 done' is displayed on soundbar (count down 5-1)
Smart Mode Off (Standard Mode On)
- To turn off, hold mute button for 3 seconds and press + on remote
- Changed to standard mode (no added effects, preset EQ settings)
- Soundbar reverts back to Smart Mode every time bar turned off/standby
Night Mode
- Press mute for 5 seconds then press - on remote
DTS:X Neural X Upscaling Off
- During DTS-X playback hold Atmos button for 10 seconds on remote
Check Battery Charge of Detachable Speakers
- Hold mute button for 5 seconds then press Atmos button on remote
- Will look like BAT_L80_R70 (left speaker, right speaker)
Auto Sync
- Press and hold TV button for 3 seconds and then press + on remote
- Within 5 seconds press + or - to adjust audio delay
Cycle through various sound modes (unsure of purpose yet)
- Hold bass button for 5 seconds, then press + on remote
Restore Factory Settings
- Hold Power and Source button on soundbar for more than 10 seconds
Software Update
- If connected to Wifi/LAN bar will automatically update as long as rear speakers are docked
- Speakers must be docked until update finished
- WAIT or UPDATING displayed while update is underway, DONE displayed when done
Updating by USB
- Attach USB drive to USB port, press power and - on bar for more than 10 seconds
4
Comments
글쓰기 |
감사합니다. 저도 위에 설명은 봤는데 더 아쉬운건 각 기능이 뭔지 명확한 설명이 없다는 것 같애요.
Night Mode 하면 어떻게 되는건지, Smart Mode Off 하면 어떻게 되는건지...
제발 앱 하나 만들어주면 좋겠습니다.